Bilge Pump - Fully Automated

RULE-MATE - AUTHENTIC BRAND

3 year limited warranty

1100 Gallons Per Hour / 4164 Litres per Hour / 69 Litres per Minute

12 volt 4 amp

28mm (1-1/8") hose outlet

 Rule-Mate fully automatic submersible bilge pumps with Rule's exclusive

"Spongeability" feature. New innovative design incorporates the bilge pump

and water sensor in a single housing. Unique Rule "Spongeability" feature

leaves the bilge the driest ever - when water in the bilge reaches a certain

height the sensor automatically activates and the pump runs until water is

pumped out, reducing boat weight, saving fuel and minimizing bilge odour.

Pump check feature - simply touch the pump check button and hold for a

few seconds to test cycle of the pump.

 FEATURES

Fully automatic submersible bilge pump system

Bilge water sensor and pump in a common housing

No battery drain other than when pump is in use

No float switch required

Removable strainer and impeller area are accessable to clear debris

Anti-fouling impeller

Threaded ports for easy installation. Straight and 90 degree Hose barb included

Pump and switch are internally wired for easy installation

A 3rd wire allows for manual over-ride  - Need to use Rule switch panel (not included in this listing)

or it can activate an alarm or indicator lamp

Thermal overload protection

Single touch test button feature

Eco Friendly - New Rule-Mate water sensing technology prevents motor oil in bilge from entering the waterway

DIMENSIONS

Pumps is oval shaped - base footprint size : 110mm x 70mm.

Overall dimensions Inc threaded hose port : L 150mm x W 80mm x H 115mm

Complies with Small Craft Directives (under 24 meter hull length)

3 different capacities 500 - 750 - 1100 gallons per hour (Please contact us for availability or visit our online Store for other sizes)

Visit our Store for other Boat Hardware