SUPER SARCA No. 3 Anchor & 3 Way Swivel Shackle KIT

Suit Boats 6.5m-8.5m

Keep your Anchor from twisting during retrieval and deployment. We have kitted up this Swivel & Shackle KIT for you.  This setup will prevent jamming and allow better swivel action

 

** Watch Video Demo **

youtu.be/-u7t0CW384A

 

PACKAGE INCLUDES

1 x Super Sarca No. 3 Galvanized Anchor

1 x 3 Way Swivel (316 Marine Grade Stainless Steel)

1 x 8mm Long D Shackle (316 Marine Grade Stainless Steel)

3 Links of 8mm Galvanised Shortlink Anchor Chain

NOTE: The pieces in this KIT are supplied loose

 

KIT SPECIFICATIONS

3 Way Anchor Swivel

Length: 135mm / Diameter: 28mm / Chain Size: 6-8mm

Pin Diameter: 9mm & 7mm

Fork Gap: 16mm & 9mm

Material: 316 Stainless hand polished Steel

Weight Grade: 1900lb/850kg

 

8mm Stainless Steel Long D shackle

Material: 316 stainless hand polished steel

Screw in pin

Internal Length: 60mm

Internal Width:16mm

 

8mm Short Link Anchor Chain

Material: Hot dipped Galvanised

 

SUPER SARCA No. 3 Anchor

Galvanised

Suit Boats 6.5m-8.5m

9kg
Manufactured in Australia

 

Sarca Features

  • Hoop on the rear of the anchor ensures that the Super SARCA rolls over in most situations, allowing the toe to be in its best possible position to penetrate the ocean floor and reducing dragging as the fluke digs in

  • No more chain tangled around and between the flukes preventing the anchor from taking hold. Super SARCA's unique tangle-resistant design improves anchor efficiency and safety

  • Unique design also creates a pumping action which sinks the anchor deeper. Teamed with the Super SARCA's 360° pivoting action, this makes the Super SARCA resistant to wind and tide changes

  • Incorporates an automatic reset trip release that offers you the highest rate of recovery from rocks. When anchoring in and around bommies, reef or coral the Super SARCA has less chance of getting stuck and will create less damage to the environment

  • Light in weight, easy to handle and contains no lead in the design to contaminate the marine environment

  • Available in top-quality 316 stainless steel or hot-dip galvanized mild steel

  • Certified as high holding power anchors by the Victorian Marine Board and MSA witnessed by Loylds of London to comply with the USL code; a testament to their efficiency


Mud or Sand

  • Come directly above the SARCA and apply light and steady pressure.

  • The SARCA's special slots allow a break in suction which, couple with a long shank, means the SARCA is easy to free.

Rock or Reef

  • Simply motor directly above and pull all the slack rope. Then release approximately ½ metre of rope and tie off.

  • Motor your boat forward over the anchor. This lifts the rear resulting in a high recovering rate.

  • The moment the anchor releases, the stainless steel D-shackle slides to the front of the anchors' shank and resets.

(Sarca3KIT)

SKU Sarca3KIT
Brand Super Sarca
Shipping Weight 9.4000kg
Shipping Width 0.490m
Shipping Height 0.370m
Shipping Length 0.520m

Others Also Bought

More From This Category