Standard Anchor Winch Wiring Loom Suit Boats up to 8 metres 30035

Anchor Winch Wiring Loom

Suits Boats up to 8 Metres

Package Includes

1 x Standard Anchor Winch Wiring Loom

(allowing up to 8 Metres of Wiring)

Features

We only use marine grade 3 B&S (25mm2) tinned copper wire, blind tinned copper lugs, silicone impregnated marine heat shrink and each connector is labelled for ease of installation.

Every loom includes flexible conduit for ease of installation and your 1.5M switch loom is also included.

Simply connect “A” to “A” and ”B” to “B” without the need to refer to your wiring diagram and your winch will come to life.

Specifications

Marine 3B&S (25mm²) Tinned Copper Wire

NOTE: Tinned Copper Wire has 5 times the longevity in the harsh corrosive marine environments compared with Plain Copper Wire

Up to 8 Metres of Wiring

Suits most Boats up to 8 Metres

Positive Cable

Circuit Breaker:     5.8M              

Circuit Breaker to Solenoid:   1.5M                

Solenoid To Winch Motor:     3.2M  

Negative Cable

Battery to Solenoid:            6.8M

Circuit Breaker to Solenoid:   Not Applicable

Solenoid to Winch Motor:     3.2M

Please note that Switch Looms are 1.5M in length and should suit most boat.
Viper Winch Motors are fitted with 1 M of 3B&S cable totaling  4.2 M from Solenoid to Winch Motor
Please note We have tried to accommodate for almost all boats up to 8.0M, however we cannot guarantee that one size fits all.
WARNING: Install your Viper winch and loom into the boat before you start to fit any other components! You may need to relocate them to suit cable lengths and individual boats.