Standard Anchor Winch Wiring Loom Suits Boats up to 6 Metres 30034
Anchor Winch Wiring Loom
Suits Boats up to 6 Metres
1 x Standard Anchor Winch Wiring Loom
(allowing up to 6 Metres of Wiring)
We only use marine grade 3 B&S (25mm2) tinned copper wire, blind tinned copper lugs, silicone impregnated marine heat shrink and each connector is labelled for ease of installation.
Every loom includes flexible conduit for ease of installation and your 1.5M switch loom is also included.
Simply connect “A” to “A” and ”B” to “B” without the need to refer to your wiring diagram and your winch will come to life.
Marine 3B&S (25mm2) Tinned Copper Wire
NOTE: Tinned Copper Wire has 5 times the longevity in the harsh corrosive marine environments compared with Plain Copper Wire
Up to 6 Metres of Wiring
Suits most Boats from up to 6 Metres
Positive Cable: Negative Cable
Battery to Circuit Breaker: 4.5M Battery to Solenoid: 5.5M
Circuit Breaker to Solenoid: 1.0M Not Applicable
Solenoid To Winch Motor: 2.5M Solenoid to Winch Motor: 2.5M
Please note that Switch Looms are 1.5M in length and should suit most boat.
Viper Winch Motors are fitted with 1 M of 3B&S cable totaling 3.5 M from Solenoid to Winch Motor
Please note We have tried to accommodate for almost all boats up to 6.0M, however we cannot guarantee that one size fits all.
WARNING: Install your Viper winch and loom into the boat before you start to fit any other components! You may need to relocate them to suit cable lengths and individual boats.
Be The First To Review This Product!
Help other Boat Hardware users shop smarter by writing reviews for products you have purchased.