Viper 1000 Anchor Winch S Series RAPID (100 MTRS OF 6MM ROPE & CHAIN)
1000 Electric Drum Anchor Winch Bundle
Viper "S" Series RAPID + 100m Rope & Chain Kit
5 year Warranty
Suits: 5.7+ Metre Boats
NEW Viper “S” Series RAPID 1000W All Stainless Steel Anchor Winch Bundle Inc 100m of 6mm Double Braid Rope & Pre-Spliced to 8mtrs of 6mm Gal Short Link Anchor Chain
1 x 1000 VIPER " S" Series RAPID ANCHOR DRUM WINCH (30021-6s)PICTURED WITH OPTIONAL VIPER CHAIN GUARD. AVAILABLE IN OUR STORE
5mm stainless steel sandwich plate
All fixing hardware
Installation notes & wiring diagram
Also Available.............. Wiring Loom .... Sold Separately
28mm Solid S/S Shaft With 3 Support Bearings
8mm Marine Grade 316 Plate S/S Hand Polished to a Mirror Finish
Viper 316 Stainless Steel Marine Worm Drive Gear Box
360 Degree Motor Rotation with 16 Different Positions
Max fall rate: 45mtrs per minute
Max Retrieval rate: 41 mtrs per minute
Suit Vessel Length: 5.7 mtrs +
Max Load: 195kgs
Max Holding Capacity: 1900 kgs
Weight: 15 kgs (winch only)
Well Clearance Required: Width 395mm x depth 410mm x height 260mm
PLEASE NOTE: IF YOU LIVE IN A REMOTE LOCATION AND FREIGHT COSTS BECOME PROHIBITIVE DUE TO THE SIZE AND WEIGHT OF THIS PRODUCT, WE RESERVE THE RIGHT TO REVERSE YOUR PURCHASE GIVING A FULL REFUND
THE ALL NEW, ALL STAINLESS STEEL “S” SERIES VIPER WINCH IS SHIPPING!
“The First 316 Stainless Steel Marine Gearbox on a Drum Anchor Winch in Australia”
The Viper “S” Series RAPID has set new standards in anchoring systems. The new Viper 1000W electric motor (hand polished marine 316 grade stainless steel) has made it one of best selling anchor winch in Australia. With a fall rate of 50 meters per minute and a retrieval rate of 45 meters per minute the Viper will ensure you get onto your GPS mark, first time, every time!
With unsurpassed Viper reliability, it has more torque than a conventional drum winch, 3 support bearings hugging a 28mm one (1) piece solid shaft and a 90 degree welded housing bracket which closes up the gap between your drum (preventing rope jams) and does not require any additional guards. With a life time warranty against water intrusion, and a bullet proof 5-year Viper performance warranty, you can’t go past a Viper. Now supplied with everything you need to install it, including a 5mm stainless steel sandwich plate, all required stainless steel bolts/screws/nylocs/washers, 2 face plates depending on your dash space and even your rope chain and even swivel are included.
The Viper “S” Series RAPID 1000 All Stainless Steel Anchor Winch Bundle also Inc 100mtrs of 6mm Double Braid Rope, Pre-Spliced to 8mtrs of 6mm Gal Short Link Anchor Chain
All you have to add is your own cabling or one of our custom made Bell Marine tinned copper marine wiring looms, you will never have to break your back pulling up your anchor and chain again!
Please note: 3B&S cables are already attached to our motor and leak tested, so there is no need to remove end caps that are not sealed properly!
INSIST ON A NEW “S” SERIES ALL STAINLESS VIPER ANCHOR WINCH FOR YOUR BOAT!
Be The First To Review This Product!
Help other Boat Hardware users shop smarter by writing reviews for products you have purchased.