Viper "Micro" S Series 1000 Anchor Winch Bundle 30038-6mm60m
1000 Micro Electric Drum Anchor Winch Bundle (30038-6s)
Viper “S” Series MICRO 1000W All Stainless Steel Winch Bundle – One Of The World’s Most Powerful Winch For Its Size & Now With 316 Stainless Steel Marine Gearbox!
Specially designed to have the Power and fit into those tight spots !!
Motor can be rotated into 16 different positions
Submersible / Stainless Steel
5 year Product Warranty
Lifetime Water Intrusion Warranty
Suits: 4-8 Metre Boats
Tinnies, Cuddies, Walk Arounds, Bow Rider
New Viper "S" Series 1000 MICRO All Stainless Steel Anchor Winch
60mtrs of 6mm double braid premium rope spliced to 6 mtrs of 6mm galvanised short link anchor chain - 30045
Viper pro series anchor swivel small - 30001
Viper deluxe anchor roller small - 30009
200amp reversing solenoid - 30020
LED illuminated marine rocker switch - 90021
Viper laser etched led illuminated switch cover - 90046
100 amp flush mount circuit breaker with rubber seal - 30046
Single led switch stainless steel face plate - 30051
Combo led switch & circuit breaker s/s face plate - 30052
5mm stainless steel sandwich plate -
All fixing hardware -
Installation notes & wiring diagram -
Also Available.............. Wiring Loom .... Sold Separately
THE ALL NEW, ALL STAINLESS STEEL “S” SERIES VIPER WINCH IS SHIPPING!
“The First 316 Stainless Steel Marine Gearbox on a Drum Anchor Winch in Australia”
Don’t be fooled by the name “MICRO” or by its size, this is one of the most powerful electric drum winch for its size and was designed to fit into bow riders, tinnies, walk-around’s, bass boats and any boat with restricted anchor well space or even none at all. When it comes to speed the Viper Micro is no sloth, it still houses the famous Viper 1000W electric motor (hand polished 316 stainless steel) and rotates its drum at speeds of up to 45mtrs per minute (fall rate) ensuring you get onto your GPS mark each and every time!
With unsurpassed Viper reliability, it has more torque than a conventional drum winch, 3 support bearings hugging a 1 piece solid shaft and a 90 degree welded housing bracket which closes up the gap between your drum (preventing rope jams) and does not require any additional guards. Constructed from 8mm plate 316 marine grade stainless steel (hand polished to a mirror finish) & comes std with a LIFE TIME warranty against water intrusion, and a bullet proof 5 YEAR Viper performance warranty, you can’t go past a Viper.
Now supplied with everything you need to install it, including a 5mm stainless steel sandwich plate, all required stainless steel bolts/screws/nylocs/washers, 2 face plates depending on your dash space and even your rope chain and even swivel are included.
Bundled with 60mtrs of 6mm double braid rope and pre spliced to 6mtr of gal 6mm short link chain ready to use!
Suits vessels from 4mtr right up to 8mtr and has no problem raising anchor sizes over 30lb or 15kgs with ease all day long!
All you have to add is your own cabling or one of our custom made Bell Marine tinned copper marine wiring looms and you will never have to break your back pulling up your anchor and chain again!
Please note: 3B&S cables are already attached to our motor and leak tested, so there is no need to remove end caps that are not sealed properly!
INSIST ON A NEW “S” SERIES ALL STAINLESS VIPER ANCHOR WINCH FOR YOUR BOAT!
If you would like to contact us, please message us and we will be happy to help.
PLEASE NOTE: IF YOU LIVE IN A REMOTE LOCATION AND FREIGHT COSTS BECOME PROHIBITIVE DUE TO THE SIZE AND WEIGHT OF THIS PRODUCT, WE RESERVE THE RIGHT TO REVERSE YOUR PURCHASE GIVING A FULL REFUND
Be The First To Review This Product!
Help other Boat Hardware users shop smarter by writing reviews for products you have purchased.