Super Sarca Anchor 1  - 4kg Galvanised - For 3.8m - 4.5m Boats

Reliable anchoring performance for small boats, Australian-made and certified for high holding power.

The Super Sarca Anchor #1 (4kg Galvanised) is purpose-built for boats between 3.8m and 4.5m in length. Proudly manufactured in Australia, this anchor is designed to deliver dependable hold, quick setting, and easier retrieval in a wide range of seabeds—while protecting the environment.

• Optimised for Small Boats: Suits vessels from 3.8m to 4.5m, weighing up to ½ tonne.
• Australian Innovation: Designed and manufactured locally for Aussie boating conditions.
• Self-Righting Hoop: Rolls the anchor into ideal penetration position to reduce dragging.
• Tangle-Resistant Design: Prevents chain wrap for more reliable sets and safer operation.
• Deep Set & High Holding Power: Pumping action and 360° pivot enhance hold in wind and tide shifts.
• Auto Trip Release: Built-in reset system offers exceptional retrieval from reef, rocks, or bommies.
• Eco-Friendly: Lead-free and engineered to minimise seabed damage.
• Certified Holding Power: Tested and certified by the Victorian Marine Board and Lloyd’s of London under the USL code.

Specifications:

• Material: Hot-dip galvanised steel
• Weight: 4.0kg
• No lead components = environmentally safer anchoring
• Length: 605mm
• Width: 345mm
• Height: 250mm
• A: 145mm
• B: 165mm
• C: 375mm

Recommended Setup:

• Boat Length: 3.8m to 4.5m
• Boat Weight: Up to ½ tonne
• Minimum Leader Chain: 4m of 8mm chain
• Scope Recommendation: Use 5m of rope per 1m water depth. Minimum scope: 2:1.

How to release

• Come directly above the SARCA and apply light and steady pressure.
• The SARCA's special slots allow a break in suction which, couple with a long shank, means the SARCA is easy to free.

Rock or Reef

• Simply motor directly above and pull all the slack rope. Then release approximately ½ metre of rope and tie off.
• Motor your boat forward over the anchor. This lifts the rear resulting in a high recovering rate.
• The moment the anchor releases, the stainless steel D-shackle (not included) slides to the front of the anchors' shank and resets