Super SARCA No. 3 Anchor

Suit Boats 6.5-8.5 metres

Manufactured in Australia

Features

  • Hoop on the rear of the anchor ensures that the SUPER SARCA rolls over in most situations, allowing the toe to be in its best possible position to penetrate the ocean floor and reducing dragging as the fluke digs in
  • No more chain tangled around and between the flukes preventing the anchor from taking hold. SUPER SARCA's unique tangle-resistant design improves anchor efficiency and safety
  • Unique design also creates a pumping action which sinks the anchor deeper. Teamed with the SUPER SARCA's 360° pivoting action, this makes the SUPER SARCA resistant to wind and tide changes

  • Incorporates an automatic reset trip release that offers you the highest rate of recovery from rocks. When anchoring in and around bommies, reef or coral the SUPER SARCA has less chance of getting stuck and will create less damage to the environment

  • Light in weight , easy to handle and contains no lead in the design to contaminate the marine environment

  • Certified as high holding power anchors by the Victorian Marine Board and MSA witnessed by Loylds of London to comply with the USL code; a testament to their efficiency

Easy to release on all bottom types

Mud or sand

Come directly above the SARCA and apply light and steady pressure.
The SARCA's special slots allow a break in suction which, couple with a long shank, means the SARCA is easy to free.

Rock or Reef

Simply motor directly above and pull all the slack rope. Then release approximately ½ metre of rope and tie off.
Motor your boat forward over the anchor. This lifts the rear resulting in a high recovering rate.
The moment the anchor releases, the stainless steel D-shackle slides (not included) to the front of the anchors' shank and resets.
 
Take a look at our Swivel Attachment KIT in our Store. Prevents Jamming.
 
//www.youtube.com/embed/KxENmpztet4?autoplay=1 

 

Product Specifications

PLEASE NOTE THAT THIS CHART IS A GUIDE ONLY; We recommend that you evaluate the variables listed below and choose the most suitable products for your vessel.

Anchor Type:
Galvanised Anchors
Boat Length (m):
6.5 - 8.5
Boat Weight (tons):
1.5-2 T
Guide to min length of leader chain:
6m of 8mm
Weight (kg):
9.0kg
Width (mm):
380
Height (mm):
290
Length (mm):
620
Stainless Shackle Size (mm):
10mm
Length: shank to fluke toe (mm):
200
Height: fluke to shank (mm):
120

(Sarca3)

SKU Sarca3
Model # Supersarca3
Brand Sarca
Shipping Weight 9.0000kg
Shipping Width 0.380m
Shipping Height 0.290m
Shipping Length 0.620m

Others Also Bought

More From This Category