SARCA No. 2 Anchor & 3 Way Swivel Package

Suit Boats 4.5 - 6.0m

Keep your Anchor from twisting during retrieval and deployment. The 3 Way swivel allows your anchor to slide up the bow spirit regardless of the lift angle

Package Includes

1 x Sarca No. 2 Galvanized Anchor

1 x 3 Way Swivel (316 Marine Grade Stainless Steel)

 

3 Way Anchor Swivel - Features

Take away the stress

No more twists in your Anchor chain or rope

Swivels & Pivets

Length: 135mm / Diameter: 28mm / Chain Size: 6-8mm

(Anchor Chain is Also available in our Store)

Pin Diameter: 9mm & 7mm

Fork Gap: 16mm & 9mm

Material: 316 Stainless hand polished Steel - Weight Grade: 1900lb/850kg

 

SUPER SARCA No. 2 Anchor Features

Galvanised

Suit Boats 4.5- 6.0m

6kg


Manufactured in Australia

Features

  • Hoop on the rear of the anchor ensures that the SUPER SARCA rolls over in most situations, allowing the toe to be in its best possible position to penetrate the ocean floor and reducing dragging as the fluke digs in
  • No more chain tangled around and between the flukes preventing the anchor from taking hold. SUPER SARCA's unique tangle-resistant design improves anchor efficiency and safety
  • Unique design also creates a pumping action which sinks the anchor deeper. Teamed with the SUPER SARCA's 360° pivoting action, this makes the SUPER SARCA resistant to wind and tide changes
  • Incorporates an automatic reset trip release that offers you the highest rate of recovery from rocks. When anchoring in and around bommies, reef or coral the SUPER SARCA has less chance of getting stuck and will create less damage to the environment
  • Light in weight , easy to handle and contains no lead in the design to contaminate the marine environment
  • Certified as high holding power anchors by the Victorian Marine Board and MSA witnessed by Loylds of London to comply with the USL code; a testament to their efficiency
  • Available in top-quality 316 stainless steel or hot-dip galvanized mild steel

Easy to release on all bottom types

Mud or sand

Come directly above the SARCA and apply light and steady pressure.
The SARCA's special slots allow a break in suction which, couple with a long shank, means the SARCA is easy to free.

Rock or Reef

Simply motor directly above and pull all the slack rope. Then release approximately ½ metre of rope and tie off.
Motor your boat forward over the anchor. This lifts the rear resulting in a high recovering rate.
The moment the anchor releases, the stainless steel D-shackle slides to the front of the anchors' shank and resets.

Product Specifications
PLEASE NOTE THAT THIS CHART IS A GUIDE ONLY; We recommend that you evaluate the variables listed below and choose the most suitable products for your vessel.

Anchor Type:Galvanised Anchor

Boat Length (m):4.5- 6.0

Boat Weight (tons):1.5 T

Guide to min length of leader chain:5m of 8mm

Weight (kg):6.0kg

Width (mm):375 Height (mm):280  Length (mm):640

Stainless Shackle Size (mm):8mm

(S2-99025)

SKU S2-99025
Brand Super Sarca
Shipping Weight 7.4000kg
Shipping Width 0.400m
Shipping Height 0.370m
Shipping Length 0.520m

Others Also Bought

More From This Category