Super Sarca Anchor 2 with 3 Way Swivel Shackle Kit

Perfect for Boats 4.5m – 6m | Made in Australia

Looking for a secure, tangle-free anchoring solution?  Boat Hardware have kitted up the perfect Anchor & 3 Way Swivel Shackle Kit for you.

This setup will prevent jamming and allow better swivel action, the Super Sarca Anchor No. 2 with 3 Way Swivel & Shackle Kit is the complete setup for hassle-free anchoring in Australian waters. Built for durability and efficiency, this kit helps prevent chain twist, improves holding power, and protects the marine environment.

• Suits boats from 4.5m to 6m - Refer to the Super Sarca anchor sizing chart
• Includes 6kg Super SARCA Anchor (Galvanised)
• Manufactured in Australia for tough marine conditions
• Rear hoop design ensures optimal seabed penetration - Rolls over in most situations, allowing the toe to be in its best possible position to penetrate the ocean floor and reducing dragging as the fluke digs in.
• Tangle-resistant fluke design – no more chain jams
• 360° pivoting action resists wind and tide changes
• Automatic reset trip release – easier recovery from rocks or reef
• Environmentally friendly – no lead, less reef damage - When anchoring in and around bommies, reef or coral the Super SARCA has less chance of getting stuck and will create less damage to the environment.
• Lightweight & easy to handle without compromising strength
• Certified high holding power – Victorian Marine Board & MSA

Included in This Kit (Supplied Loose):

• 1 x Super SARCA No. 2 Galvanised Anchor – 6kg

• 1 x 3-Way Swivel – 316 Marine Grade Stainless Steel

• 1 x 8mm Long D Shackle – 316 Stainless Steel, Screw Pin

• 3 Links of 8mm Galvanised Short Link Anchor Chain

3 Way Anchor Swivel Dimensions:

• Length: 135mm

• Chain Size: 6–8mm

• Fork Gap: 16mm & 9mm

• Material: 316 Stainless Steel (Polished)

• Load Rating/ Weight Grade: 850kg (1900lb)

Shackle Dimensions:

• Internal Length: 60mm

• Internal Width: 16mm

• Material: 316 Stainless Steel (Polished)

Anchor Chain:

• Material: Hot Dipped Galvanised

• Size: 8mm Short Link

Secure your spot with confidence – this premium anchor kit is in stock and ready to ship.
Buy from Boat Hardware today for same-day dispatch across Australia!

How to release

Mud or Sand

• Move the boat directly above the Sarca Anchor and apply light and steady pressure.
• The Sarca's special slots allow a break in suction which, couple with a long shank, means the Sarca is easy to free.

Rock or Reef

• Simply motor directly above and pull all the slack rope. Then release approximately ½ metre of rope and tie off.
• Motor your boat forward over the anchor. This lifts the rear resulting in a high recovering rate.
• The moment the anchor releases, the stainless steel D-shackle slides to the front of the anchors' shank and resets.