No. 5 Sarca Excel Galvanised Anchor
Suits 12-15 Metre Boats
LEAVE THE MUD BEHIND WITH PROVEN CONVEX DESIGN
Low centre of gravity self rights and keeps the toe hunting continuously to take advantage of the ocean floor
Tested for super high holding power certification
Unrivaled Holding Power
1 x No. 5 Sarca Excel Galvanised Anchor
Suits Boats: 12-15 Metres
Boat Weight: 7-15 Tons
Overall Size: W415 x H425 x L985mm
Please refer to diagrams and measurement images above for more detailed specifications
New generation anchor without a roll bar
The Excel has great aesthetics and will enhance the bow of any boat
Unlike roll bar designs the Excel will fit just about any anchor housing arrangement—pull pit and bow roller designs
The Excel range caters for boats from the smallest run about to large ocean going work boats, yachts and trawlers.
When comparing the Sarca Excel to other anchor designs it is traditional in looks only, when it comes to performance there is no comparison.
The Sarca Excel is a certified Super High Holding Power anchor
It has a cast filled ballast to ensure self righting
It is a new design of 70 percent convex, 30 percent concave, part of this concave being the cutting edges.
Excel is not a plough anchor there are no plough sheers, in their place is what are called single plain concave flukes, this being the greater part of its concave arrangement, rather than plough the substrate this new fluke arrangement is designed to compress, then directs the material-substrate over the rear of the Excel forcing itself deeper as more load is applied.
As a world first, the steel Excel version has a stainless steel cutting toe in combination with a steel fluke, this toe is not unlike the original Super Sarca toe in its shape, turned down giving instant penetration, it can be sharpened for weed or hard substrate types, being of stainless the cutting edges do not rust, all of the above makes the Excel possibly the deepest diving anchor on the market allowing incredible performance in heavy weed and many sea bed types.
The Excel with its combination of convex –concave design has apertures along the sides of its flukes, whilst the anchor is being set these apertures allow water to be dragged through, this further aides the movement of compressed sea bed and assists the deep setting in hard mud or clay, these apertures work in reverse on retrieval and helps to bring up a relatively clean Excel on retrieval.
With its shank being of bisaloy 80 or equivalent the build strength from the number four anchor and up of the Excel is exceptional, the bulbous on the underside of the toe aids in the Excel turning through wind and tide changes.
Be The First To Review This Product!
Help other Boat Hardware users shop smarter by writing reviews for products you have purchased.